The washing chamber is a hermetic passage-type chamber equipped with lifting door curtains and a ventilation system.
The wheelset is manually fed into the washing chamber and mounted on the rollers of the rotation mechanism. The door shutters are closed, the wheelset is washed, rinsed and blown with compressed air. At the end of the cycle, the door curtains are raised and the wheelset is ejected.
The complex is controlled from the control panel in both automatic and manual modes, in the setup mode, the washing parameters are set. The automated process control system is built on the basis of an industrial controller, the control panel is equipped with a touch panel.
Specifications
| Name of parameters | Value |
| Washer type | single-chamber, walk-through, non-contact |
|
Machined wheelset: |
1260
2520
2750
|
|
Wheel pair washing time, min. |
7...10 |
| Washing solution temperature, ºС | 40...90 |
| Speed of wheelset rotation, rpm | 5 |
| Number of washing nozzles, pcs. | 30 |
|
Wheel set washing pump: |
176
5,5
|
| Water heater power (TEN), kW | 90 |
| The volume of the washing solution, m.cub. | 4,6 |
| Tank capacity for washing solution, m.cub. | 5,5 |
| Curtain drive type | electromechanical |
| Wheelset ejector drive | pneumatic |
| Installed electric power, kW | 140 |
| Air pressure, MPa | 0,4...0,6 |
| Extractor fan power, kW | 1,5 |
| Ejector drive type | pneumatic |
| Overall dimensions of the sink (LxWxH), no more than, mm. | 3800х1800х2400 |
| Overall dimensions of the bath (LxWxH), no more than, mm. | 3400х2400х1850 |
| Weight, kg | 4200 |
*At the request of the customer, it is possible to change the characteristics and parameters of the wheel set washing complex.